12-24 VDC 2-Wire Horn Strobe - Outdoor Rating w/ Back Box

The 4WTAB is a 4-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder.​​​​​

Photoelectric Smoke Detector

The i4 Interface Module connects up to 12 detectors to a wide range of control panels using only 2 to 3 zones.

PC2RK is a red, two-wire, ceiling-mount, outdoor horn strobe with selectable strobe settings. Outdoor back box included.

4 – 20 psi - Alarm Pressure Switch

SCWK is a white, ceiling-mount, outdoor strobe with selectable strobe settings.

12-24 VDC 2-Wire White Horn Strobe - Outdoor Rating w/ Back Box - Image shows red

12/24 VDC nominal - smoke detector base

SRK is a red, outdoor strobe with selectable strobe settings

The 2WTRB is a 2-wire, photoelectric i3 smoke detector with thermal sensor and Form C relay.​​​​​

2-wire Photoelectric Smoke Detector w/ Base

12/24 VDC nominal - smoke detector base

The 2WTAB is a 2-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder.​​​​​

The 4WTAB is a 4-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder , and Form C relay.​​​​​

High/Low Pressure Supervisory Switch, Two SPDT, 10–100 PSI

SCRK is a red, ceiling-mount, outdoor strobe with selectable strobe settings.

Remote Duct Detector Test Station

Sensitivity reader for all i3 series standard, sounder, and Form C relay detectors

12/24 VDC Carbon Monoxide Detector with RealTest™ Technology

No Description Available

The 4WTRB is a 4-wire, photoelectric i3 smoke detector with thermal sensor and Form C relay.​​​​​

Best-in-class 4-Wire carbon monoxide (CO) and smoke detection technology in a single, system-connected device. Requires interface module COSMOD4W.​​​​

No Description Available

Post Indicator/Butterfly Valve Supervisory Switch

PC2WHK is a white, two-wire, outdoor, ceiling-mount horn strobe with selectable high-candela strobe settings. Outdoor back box included.

RTS2 is a multi-signaling accessory, without strobe, designed to work with InnovairFlex 4-wire conventional duct smoke detectors.​

Best-in-class 2-Wire carbon monoxide (CO) and smoke detection technology in a single, system-connected device. Requires interface module COSMOD2W.​​​

120 VAC Horn/Strobe with Back Box

4-wire Photoelectric Smoke Detector & Heat w/ Base

12-24 VDC 2-Wire Wall Horn Strobe - Standard cd, Red

PC2RHK is a red, two-wire, ceiling-mount, outdoor horn strobe with selectable high-candela strobe settings. Outdoor back box included.

12/24 volt, white horn for ceiling or wall installation

Waterflow Detector for use with 6" pipe

No Description Available

2-wire photoelectric duct smoke detector​​​​

10" 24 VDC Alarm Bell for use in fire, burglary and sprinkler systems or other signaling applications

The 4WITARB is a 4-wire, photoelectric i3 smoke detector with isolated thermal sensor, built-in sounder, and Form C relay.​​​​​

Weatherproof Back-box for Alarm Bells

The SpectrAlert Advance LENSR is red lens used for any indoor or outdoor wall mount strobes.​​​​​​​​

PC2WK is a white, two-wire, ceiling-mount outdoor horn strobe with selectable strobe settings. Outdoor back box included.

DISCONTINUED - No Description Available

2-wire Photoelectric Smoke Detector & Heat w/ Base

12-24 VDC 2-Wire Wall Horn Strobe - High cd

135°F Fixed Temp/Rate-of-Rise, Single-Circuit Mechanical Heat Detector with Plain Housing.

SCRHK is a red, ceiling-mount, outdoor strobe with selectable high-candela strobe settings.

12-24 VDC 2-Wire Strobe with standard cd

12-24 VDC 4-Wire Red Horn Strobe - Outdoor Rating w/ Back Box

The SpectrAlert® Advance MHR is the red, 12/24-volt mini-horn used where a smaller notification device is desired.​

No Description Available