Plug Connector, For FT 200 Furniture Terminal, Plastic, Green

Linear 2501-10 is a 10 pack of blocking capacitors which are used in systems where DC and/or infrared control pulses are present on the coaxial cable.

Linear 2503-10 is a 10 pack of in-line attenuators that can be inserted in coaxial cable feeds to reduce signal amplitude levels.

Linear 2506-10 is a 10 pack of in-line attenuators that can be inserted in coaxial cable feeds to reduce signal amplitude levels.

Linear 2507-10 is a pack of 10 terminators that provides a 75-ohm load that can be used on unused splitter output ports in order to maintain uniform signal levels.

Linear 2619 allows for structured wire systems to be used in 19 inch EIA racks for fast expandable installations.

Linear 2620 is a one-space 19" EIA rack mount for the 5400 and 5500 series modulators.

Linear H000 can be used to replace any broken OpenHouse grid mounting snap locks. The snap locks secure the modules to the grid. Pull the lock out to release, push the lock in to lock.

Linear H001 allows non-OpenHouse modules to be fastened to the OpenHouse grid. Place the plastic insert through a hole in the module and secure it to the grid by driving in the screw.

Linear H208 Lock Kit allows locking OpenHouse enclosures with a key to provide additional security.

Linear H271 Coupling Tube is an enclosure accessory for connecting two enclosures. Wiring between the two enclosures is protected inside the coupling tube.

Linear H272 Snap-In Grommets (5-pack) provide wire protection from the sharp metal edges of enclosure knockouts.

Linear TC-200A Tilt Compensator is an in-line filter designed to create an attenuation loss equal and opposite to cable loss.

Interface Module to PC or PDA

Allows a single composite CCTV video signal to be transmitted via a single unshielded twisted pair for more versatile security and surveillance cabling.

Allows CCTV video and "up-the-coax" Pan, Tilt, Zoom (PTZ) control signals to be transmitted via a single unshielded twisted pair (UTP) cable for more versatile cabling.

Allows a single composite CCTV video signal to be transmitted via a single unshielded twisted pair (UTP) cable for more versatile security and surveillance cabling.

Allows one (1) S-Video channel and two (2) audio channels to be connected via four (4) unshielded twisted pairs.

May be used in pairs or in conjunction with standard twisted pair cross-connect devices and other MuxLab CCTV baluns.