Photobeam-Pro

Plug Connector, For FT 200 Furniture Terminal, Plastic, Green

Wire-In AC Bridge Rectifier

AC Plug-In Bridge Rectifier

ElectroLYNX Adaptor

Smart Pack Iii Power Control 12-32 Volt Ac/Dc Input, Led, Built In Rectifier, Continuous Duty Timer Re-Settable Fuse

In Line Buzzer

Plug In Connector

Linear 2010 in-wall power injector IR interface wall plate with two functions.

Linear 2100A is bi-directional and can input as well as output IR information and will accept any 12 volt target using the input jack or three wire screw terminal.

Linear 2130A is a set-top IR target that connects to the Model 2100A In-Wall IR Interface. Seven foot cord with mini stereo plug and double sided adhesive mounting.

Linear 2131 is a J-box IR target that connects to the Model 2100A in-wall IR interface through three wires.

Linear 2171 connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub.

Linear 2171-4 generic emitters can also be used with Linear’s video hubs, 2100A and 2010 in-wall interface, or with a 5500 series IR enabled modulator connected to a video hub.

Linear 2172 connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub.

Linear 2181 allows each TV with a target that is connected to the slave unit, to send IR signals back to the audio/video devices connected to the master DA-550 or DA-8200.

Linear 2184 allows local IR access on DA-550 and DA-8200 distribution amplifiers. The distribution amplifiers have a three-pin power connector.

Linear 2501-10 is a 10 pack of blocking capacitors which are used in systems where DC and/or infrared control pulses are present on the coaxial cable.

Linear 2503-10 is a 10 pack of in-line attenuators that can be inserted in coaxial cable feeds to reduce signal amplitude levels.

Linear 2506-10 is a 10 pack of in-line attenuators that can be inserted in coaxial cable feeds to reduce signal amplitude levels.